Description
Application
Apply with Epoxy spreader. 2 gal kit cover 100ft2
Multi-layer application
- CHEMICAL ADHESION: Product must be dry to the touch, but still soft (tacky). Normally, this texture is obtained 8 hours after initial layer. * Never pour if the first layer is still liquid*.
- MECHANICAL ADHESION: When the 1st coat is dry (more than 16 hours), lightly sanding the first coat to ensure a perfect bonding (120 paper) .
Frequently Asked Questions
Can my epoxy freeze? A:Yes! UV Resins are very sensitive to freezing, which has the effect of causing crystallization (deposition and solidification of part A). Simply reheat the container in a water bath to bring the resin back to a liquid state. See Document Crystallization for more details
What should I use to clean the tools?
A: Xylene
If i bought my epoxy last year, is it still good?
A:The recommended pot life is 1 year after purchase. With time, the hardener oxidizes and may become amber.
Will my epoxy harden faster if I put more hardener?
A: No. The ratio must be perfectly respected (1A:1B). An improper ratio will cause the epoxy to not fully cure.
After sealing the edges (wood sides) , how long should I wait before pouring the R-Cast2.0?
A: You need to wait at least 12 hours. It is mandatory to sand lightly (grain 120) to ensure good adhesion
Important Notes: Ryver Epoxy is not responsible for any losses incurred as a result of using the product. The use of the product requires several technicalities, it is therefore essential to perform few samll projects before making a large project. Moisture of the wood must be between 8% and 12% (kiln dry). Several factors can influence the final result, it is strongly recommended to refer to someone with experience before starting a first project. In case of an allergic reaction, stop using the product immediately
Reviews
There are no reviews yet.